Please enter your username and password to login
Email Address: | |
Password: |
Logging in
Welcome, click 'Log in' to retrieve your data or press 'New Configuration' to program a new device
Please wait while we get things ready...
Please choose if you have a class A or Class B device
Please wait while we check the MMSI entered has not already been programmed to a device
Please wait while we get things ready...
Please review the settings below and press "Generate Config" to download your config file.
MMSI: |
|
Vessel Name: |
|
Call Sign: |
|
Vessel Type: |
|
Internal GPS Antenna Location |
|
Silent Mode: |
|
Long Range Mode: |
|
Port 1 Sentence Output: |
|
Port 1 Speed: |
|
Port 2 Sentence Output: |
|
Port 2 Speed: |
|
External Silent Mode Switch: |
|
Receive NMEA2000: |
|
NMEA2000 To WiFi: |
|
NMEA0183 To WiFi: |
|
WiFi SSID: |
|
Network Password: |
|
Log in to retrieve your last configuration
Please wait while we contact our servers
---
Would you like to create an Ocean Signal account, you get an extra year warranty on your product and it will make configuring your products easier in the future!
First Name: | |
Last Name: | Country | |
Vessel Type | |
Boat Use | |
I give consent to Ocean Signal to be contacted occassionally to be notified of new products or information that I might find useful |
|
Email Address: | |
Confirm Email Address: | |
Password: |
Account created! You will receive a welcome email shortly
Your MMSI release request has been sent to customer support. We aim to process requests within 48 hours. You can now close this window.
Please wait while we contact the server to generate your new config File, this will take a few seconds
Your config file has been created, click below to download it to your computer, then copy it to a USB stick formatted to FAT32. Plug it into your AIS unit and the config will be written to the device.
The configuration file is now downloading, when complete copy the ATB1.ini file to the root directory of a USB stick.
With the power to the AIS off, connect the USB stick to the ATB1 using the supplied USB OTG cable.
Turn on the power and the LED will flash Green/Amber then Flash Red. Wait until the LED shows Green.
Your ATB1 is operational.
Press and hold the LED button for 10 seconds, the LED will start to flash Red/Amber and on release will alternate Green/Amber to allow the USB stick to be safely removed without corruption.
The LED will revert to normal operation once the USB stick is removed.
Please contact info@oceansignal.com for support
You can now close this window.