Software Updates

SOFTWARE FOR ATB1 CLASS B AIS TRANSCEIVER

To update the firmware on the ATB1:

  • Download the file below and unzip it to a USB stick that has been formatted to FAT32
  • Power down the ATB1
  • Connect the USB stick to the ATB1 using the supplied USB on-the-go cable
  • Power up the ATB1
  • The LED will flash green then briefly turn red
  • Once the LED has turned green (or amber if the AIS is in Silent Mode) the update is complete
  • Press and hold the LED button for 10 seconds (until it flashes Amber)
  • It is now safe to remove the USB stick without fear of corruption
  • The ATB1 will return to normal operation

 

 

Version

 

 

Release Date

 

 

Serial Number

 

 

Description

 

Download

 

01.01.00
28/01/2019
0100010T
Production Initial Release  

 

01.02.00
27/07/2019
Minor Bug Fixes

  • Set-up LED extinguish after 30 mins
  • Incorrect vessel length and beam reported on some received targets transmitted on NMEA2000
  • Potential reported “Lost/Invalid Heading” when connected to NMEA2000 Heading source

 

01.03.00
09/01/2020
New Features

  • New NMEA2000 PGNs added
  • NMEA2000 and NMEA0183 Multiplexing to WiFi
  • External Silent Mode Switch capability

Enables New App Features

  • Improved fault diagnotic page
  • Received Target List
  • Received Target Details
  • CPA/TCPA Alarms
  • Connected Instrument Data display
  • MOB Management
  • Notification of Firmware updates

Minor Bug Fixes

  • Intermittent NMEA 2000 dropout
  • WiFi instability during multiple device connection