M100/M100X

The Ocean Signal M100 and M100X MSLD (Maritime Survivor Locating Device) has been designed to meet the needs of the professional marine market and its offshore workers. The M100 and M100X can be fitted to a life jacket* and will automatically activate on inflation of the jacket. Once activated the M100 and M100X will transmit an alert to all AIS receivers and AIS enabled plotters in the vicinity. The M100 and M100X also transmit a 121.5 MHz homing signal in addition to the AIS.

 

* Always refer to the manufacturer for specific instructions before installing this product directly to your life jacket.

SKU: 742S-02087 (M100) / 742S-02088 (M100X)

Categories: Professional

Feature bullet

AIS transmissions for position plotting

Feature bullet

Designed for automatic activation in Life Jacket*

Feature bullet

>12hours transmission

Feature bullet

2 year warranty

Feature bullet

M100X ATEX and IECEx Zone 2

Feature bullet

121.5MHz transmission for homing

Feature bullet

Simple to fit to Life Jacket*

Feature bullet

66 channel GPS for fast accurate positioning

Feature bullet

Five year battery life

The integrated 66 channel GPS ensures a position update is provided every minute via AIS. The difference between the Ocean Signal M100 and M100X is that the M100X is designed to meet the European ATEX directive and has IECEx approval for use in zone 2 explosive atmospheres.

Want an MOB with 406 MHz?  Check out the new rescueME PLB3

The following statement is for US customers only:  This device has not been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.

 

 

AIS Transmission

Transmit Power(EIRP)

1Watt

Frequency

161.975/162.025MHz

Baud Rate

9600Bd

Synchronisation

UTC

Homer Transmission

Transmit Power(EIRP)

50mW

Frequency

121.5MHz

Environmental

Temperature Range (Operational)

-20°C – +55°C

Temperature Range (Storage)

-30°C – +70°C

Damp Heat (humidity)

40°C @ 93%

Waterproof

10m depth

Dimensions

132mm x 53mm x 28mm

Standards

RTCM SC11901, EN303 098, EN302 961

Classification

M100X

Ex ic T4 Gc

Manuals

M100 User Manual

Download

M100X User Supplement

Download

Certificates

M100 RED Type Examination Certificate

Download

M100 RED Declaration of Conformity

Download

M100X ATEX Product Certiifcate

Download

M100X IECEx Product Certificate

Download

Your Ocean Signal product is warranted against manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase and in accordance with the following conditions.

 

Ocean Signal will at its discretion, repair or replace faulty product free of charge excluding the cost of shipping. Proof of purchase from the original purchaser shall be required in order for a warranty claim to be valid. All claims shall be made in writing to Ocean Signal or an approved service dealer or
distributor.

 

Ocean Signal shall not be liable to the buyer under the above warranty:

 

  • for any repairs or modifications carried out on the product using parts that are not supplied
    or approved by the manufacturer Ocean Signal including batteries and for work carried out
    other than by Ocean Signal or approved service dealers,
  • for any part, material or accessory that is not manufactured by Ocean Signal, the consumer
    will be covered by the guarantee / warranty offered to Ocean Signal by the manufacturer or
    supplier of such a component,
  • for product which has not been fully paid for,
  • for any product supplied by Ocean Signal to a customer under an alternative warranty or
    commercial agreement,
  • for the cost of shipping product to and from the customer.
  • The Battery is only warranted until the date of expiry and provided the unit is tested in accordance
    with the information in the user manual as noted by the electronic witness stored within the product.

 

The following specific item is excluded from this warranty:

 

  • Damage to the antenna

 

This warranty does not affect your statutory rights.

Why does the displayed MMSI not change when I enter my DSC MMSI number?

All AIS and DSC MOBs are pre programmed at the time of manufacture with the self identification MMSI number. In the case of the rescueME MOB1, or the M100, this number will always start 97260—-. The 972 identities the device as an MOB device and the 60 identifies the device as manufactured by Ocean Signal.
It is not possible for the user to change this number, which is a requirement of the relevant approval standards.
The DSC MMSI number programmed in by the user is the number the MOB1 will send the distress calls to. Compatible radios will still show the ‘from’ MMSI number as the 972 number printed on the rear of the MOB1. Likewise the target displayed on an AIS plotter will also show with the target address as the 972 number.